Apply Air to Water Heat Pump to Your Pool

To meet the water temperature standards of swimming pools, the circulating water of swimming pools needs to be replenished with heat, and the current heating methods, such as oil or gas boilers, have obvious disadvantages in terms of economy and environmental protection. As a new technology with great potential for development and application, air to water heat pump is a highly efficient, energy-saving, and environmentally friendly technology with broad practical value. Here comes the air to water heat pump.

Here is the content list:

• A brief introduction to the working principle and installation requirements of air to water heat pumps

• Why is air to water heat pump so popular today?

A brief introduction to the working principle and installation requirements of air to water heat pumps

The compressor takes in low-pressure superheated refrigerant vapor, which is compressed by the compressor into a high-temperature, high-pressure superheated vapor that is fed into a water-side heat exchanger to heat the swimming pool water, which is then condensed into a saturated or supercooled refrigerant liquid. After the electronic expansion throttle, it enters the fin heat exchanger to absorb the heat of the environment and vaporize, and then enters the vapor-liquid separator, and then is sucked and compressed by the compressor for the next cycle. 

A heat pump is to absorb heat from the surrounding environment to produce heat, in the heating process there are cold air emissions, the installation of heat pumps needs to comply with two basic principles: one is to install the heat pump as far as possible in places with high ambient temperature, to ensure that the air to water heat pump can operate at high efficiency, which is the key to reducing operating costs; second, the air to water heat pump installation site ventilation conditions should be good, so that the heat pump emissions of cold air as soon as possible to spread, so as not to reduce the heat pump If for special reasons the heat pump is installed in a place with poor ventilation, ventilation ducts must be installed to direct the cold air from the heat pump to a space far away from the heat pump, and if possible, the cold air can be directed to other spaces that need cold air for cooling.

Why is air to water heat pumps so popular today?

Traditional oil-fired water heating units, gas-fired water heating units, and electrically heated water heating units have common characteristics: they cannot directly heat the swimming pool water, but need to heat the swimming pool water through a heat exchanger, with many thermal conversion loops, low thermal efficiency, high operation and maintenance costs, and low safety, etc. Oil-fired and gas-fired water heating units are gradually restricted due to the flammability and explosiveness of the energy used and the pollution of the environment by exhaust gas emissions, while electric water heating units are not the ideal choice due to the need for electric capacity increase, low thermal efficiency and high operating costs. In addition to the initial investment, air to water heat pump water heating units is gradually being promoted and used because of their high efficiency, energy saving, safety, environmental protection, and other advantages.Air to water heat pumps is already the talk of the town.

Our company has developed a wide range of air to water heat pumps which are tested extensively before leaving the factory to ensure quality. These air to water heat pumps are durable. You can consider our cost-effective products. Our company website is https://www.laileyheatpump.com/, please feel free to inquire about us!